network problem

[Drew Kelling]

On Friday, July 23, 2010 04:46:54 am Roelof Wobben wrote:
> Hello
> 
> 
> 
> I found the problem.
> 
> 
> 
> If dhcpcd starts at booting the problem is solved.
Dhcp should be starting by default from a vanilla install...
> 
> 
> 
> How can I do that the lunar way.
Use the   'lservices ' program and check to see if its enabled on startup.

Best of  luck!
> 
> 
> 
> Roelof
> 
> > Date: Fri, 23 Jul 2010 10:38:21 +0200
> > From: duncan at thermal.esa.int
> > To: lunar at lunar-linux.org
> > CC: rwobben at hotmail.com
> > Subject: Re: network problem
> > 
> > I'm at work at the moment and don't really have time to spend on this,
> > so please reply to the lunar mailing list where others maybe can.
> > 
> > >> * can you configure eth0 manually using ifconfig?
> > > 
> > > maybe I can but I don't have a clue how.
> > 
> > ifconfig eth0 10.0.0.1 # or other unused/private IP address
> > 
> > see man ifconfig for details
> > 
> > >> * if using 'lnet' to configure eth0, make sure that it really wrote
> > >> the correct things back to /etc/config.d/network/eth0
> > > 
> > > Yes, when I choose as manager ifplugd then I get a ipv6 adress but
> > > no dns info. On booting I see a message : failed to set gateway
> > 
> > if you use dhcpcd then gateway and dns stuff should be set for you.
> > if using manual configuration, you need to supply these addresses.
> > 
> > >> * is 8139cp enabled as a module in the kernel?
> > > 
> > > Yes, I doublechecked that
> > 
> > sorry, but I don't have this card, so don't know the current status,
> > but a web search shows old problems with 8139cp and 8139too conflict.
> > does that help?
> > 
> > >> * any clues in the /var/log files?
> > > 
> > > Not that I can find it.
> > 
> > Running lspci and ifconfig might give you some more clues.
> > 
> > I'm afraid I have no time to help further.
> > D.
> 
> 
_________________________________________________________________
> Een netbook met Windows 7? Hier vind je alles dat je moet weten.
> http://www.windows.nl/netbook