mount automatically cd/dvd

cesar l. cesarlimap at gmail.com
Tue Nov 13 03:22:49 CET 2007


>From kernel log. hald was started correctly.
However when I plugged the pendrive:

Nov 12 23:05:01 LUNAR usb 1-6: new high speed USB device using ehci_hcd and
address 2
Nov 12 23:05:01 LUNAR usb 1-6: configuration #1 chosen from 1 choice
Nov 12 23:05:01 LUNAR scsi2 : SCSI emulation for USB Mass Storage devices
Nov 12 23:05:01 LUNAR usbcore: registered new interface driver ub
Nov 12 23:05:06 LUNAR scsi 2:0:0:0: Direct-Access     SanDisk  U3 Cruzer
Micro  3.27 PQ: 0 ANSI: 2
Nov 12 23:05:06 LUNAR sd 2:0:0:0: [sdb] 8015502 512-byte hardware sectors
(4104 MB)
Nov 12 23:05:06 LUNAR sd 2:0:0:0: [sdb] Write Protect is off
Nov 12 23:05:06 LUNAR sd 2:0:0:0: [sdb] Assuming drive cache: write through
Nov 12 23:05:06 LUNAR sd 2:0:0:0: [sdb] 8015502 512-byte hardware sectors
(4104 MB)
Nov 12 23:05:06 LUNAR sd 2:0:0:0: [sdb] Write Protect is off
Nov 12 23:05:06 LUNAR sd 2:0:0:0: [sdb] Assuming drive cache: write through
Nov 12 23:05:06 LUNAR
Nov 12 23:05:06 LUNAR sd 2:0:0:0: [sdb] Attached SCSI removable disk
Nov 12 23:05:06 LUNAR sd 2:0:0:0: Attached scsi generic sg1 type 0
Nov 12 23:05:06 LUNAR hald[1902]: segfault at 0000000c eip b7e82ccb esp
bfe7ffd0 error 4


2007/11/9, cesar l. <cesarlimap at gmail.com>:
>
> No failed build.
> Something happens when there is a cd/dvd/pendrive at drive/plugged.
> I can start hal normally with empty drives, but when I put a cd/dvd or
> pendrive
> hal stops working.
>
> 2007/11/9, Dennis Veatch <dennisveatch at bellsouth.net>:
> >
> > On Friday 09 November 2007 07:14:55 pm cesar l. wrote:
> > > I realized that hal is failing to start on system boot.
> > > And I tried starting manually without success.
> > >
> > > # /etc/init.d/hald status
> > > Checking hald: process died!                                         [
> >
> > > FAILED ]
> >
> > lvu compile hal, sounds like maybe it failed a lin.
> >
> > If the compile log does show a failed build then, lin kernel-headers-2.6and
> > then lin hal.
> >
> > >
> > > 2007/11/9, Kok, Auke < sofar at foo-projects.org>:
> > > > in any case it points to a HAL issue.
> > > >
> > > > Auke
> > > >
> > > > cesar l. wrote:
> > > > > Is this issue only for cd/dvd drives? Because pendrives are not
> > > > > mouting too :/
> > > > >
> > > > > 2007/11/9, Kok, Auke <sofar at foo-projects.org>:
> > > > >> there is some work going on upstream to make hal stop polling the
> >
> > > >
> > > > cdroms
> > > >
> > > > >> which is
> > > > >> a waste of energy. You may now have to configure hal to
> > explicitly
> > > > >> poll your
> > > > >> cd/dvd. Please check with the hal documentation.
> > > > >>
> > > > >> Auke
> > > > >>
> > > > >> cesar l. wrote:
> > > > >>> The udev that appear was I trying re-lin to get problem solved.
> > > > >>>
> > > > >>> 2007/11/9, cesar l. <cesarlimap at gmail.com>:
> > snip
> > > > >>>>
> > > > >>>> 2007/11/9, Dennis Veatch < dennisveatch at bellsouth.net>:
> > > > >>>>> On Friday 09 November 2007 07:59:09 am Zbigniew Luszpinski
> > wrote:
> > > > >>>>>> Friday 09 of November 2007 13:45:17 cesar l. wrote:
> > > > >>>>>>> After an lunar update cd/dvd stopped to mount automatically
> > :/
> > > > >>>>>>> Somebody has any idea?
> > > > >>>>>>
> > > > >>>>>> Which modules were updated?
> > > > >>>>>> If you do not know this, look at date of files in
> > > > >>>>>
> > > > >>>>> /var/log/lunar/install
> > > > >>>>>
> > > > >>>>>> directory.
> > > > >>>>>>
> > > > >>>>>> zbiggy
> > >
> > > > >>>>>
> > > > >>>>> Better yet, "lvu activity" and page down to the date the
> > update was
> > > > >>>>> done.
> > > > >>>>>
> > > > >>>>> --
> >
> > > > >>>>
> > > > >>>> --
> > > > >>>> cesar l.
> > > >
> > > >
> > ------------------------------------------------------------------------
> > > >
> > > > >>> _______________________________________________
> >
> >
> >
> >
> >
> > --
> > You can tuna piano but you can't tune a fish.
> >
> > http://www.lunar-linux.org/
> > It's worth the spin.
> > _______________________________________________
> > Lunar mailing list
> > Lunar at lunar-linux.org
> > http://foo-projects.org/mailman/listinfo/lunar
> >
>
>
>
> --
> cesar l.




-- 
cesar l.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://foo-projects.org/pipermail/lunar/attachments/20071113/a8b51dbd/attachment.html


More information about the Lunar mailing list