Requesting a module (host-AP)

[Wuss912]

Does the offer to help with Host-AP still stand?


> -----Original Message-----
> From: lunar-bounces at lunar-linux.org 
> [mailto:lunar-bounces at lunar-linux.org] On Behalf Of 
> michalsc at email.uc.edu
> Sent: Monday, February 10, 2003 4:04 PM
> To: This is the primary mailing list for Lunar Linux!
> Subject: RE: Requesting a module
> 
> 
> sorry the linux-wlan-ng drivers will also work for you and 
> you wont have to 
> worry about the pcmcia-cs drivers then, i am so used to 
> wireless and laptops
> 
> today i am busy with home work to do the module
> 
> but i am willing to help with it
> 
> hardkrash
> 
> 
> 
> Quoting Wuss912 <Wuss912 at cox.net>:
> 
> > It's a pci card not a pcmcia card...
> > Host-ap allows the prism 2/2.5/3 cards to act as a access point. I 
> > would be willing to test host ap if there was anyone who 
> could help me
> > make it into a module but I am going to need some serious 
> handholding
> > on
> > this one guys.. (as I have never done anything of the sort)
> > 
> > 
> > -----Original Message-----
> > From: lunar-bounces at lunar-linux.org 
> > [mailto:lunar-bounces at lunar-linux.org] On Behalf Of 
> > michalsc at email.uc.edu
> > Sent: Monday, February 10, 2003 3:39 PM
> > To: This is the primary mailing list for Lunar Linux!
> > Subject: RE: Requesting a module
> > 
> > 
> > well lnet is lunar's networking configuration utility from 
> kc8apf it 
> > handels most of out networking needs, but some support is missing 
> > either because we dont use those configurations, or cause 
> we cant test 
> > cause of
> > 
> > lack of hardware.
> > 
> > for the prisim cards i made a module for the wlan-ng cards its a 
> > module from hell though.  you need pcmcia-cs installed then you can 
> > lin linux-wlan-ng for the proper drivers for your card, 
> though if you 
> > usr a
> > orinoco card also 
> > youll have issues as cardmanager dosen's see any differance between
> > the
> > cards :-/
> > 
> > lnet is not seetup for configuring these cards either linux-wlan-ng 
> > drivers dont use the wirelesstools but they use there own 
> utilities, 
> > the prisim cards can do more than the wirelesstools support
> > 
> > youll have to read the documentation on the drivers to cofigure them
> > 
> > in time well have lnet working on them but at the monent it isnt a 
> > priority for us
> > 
> > hardkrash
> > 
> > 
> > Quoting Wuss912 <Wuss912 at cox.net>:
> > 
> > > So..
> > > How do I do that?
> > > And what is the module for these cards?
> > > If you mean wireless-tools I have that installed...
> > > I don't know what lnet is
> > > 
> > > -----Original Message-----
> > > From: lunar-bounces at lunar-linux.org
> > > [mailto:lunar-bounces at lunar-linux.org] On Behalf Of 
> > > michalsc at email.uc.edu
> > > Sent: Monday, February 10, 2003 3:26 PM
> > > To: This is the primary mailing list for Lunar Linux!
> > > Subject: Re: Requesting a module
> > > 
> > > 
> > > if your willing to test out this module and implement it well ill
> > help
> > 
> > > with the integration into lunar.
> > > 
> > > also as it looks like you have a linux wlan ng card, have 
> you tried
> > > the
> > > 
> > > moonbase module for those cards, yes i know it needs integrating 
> > > into
> > 
> > > lnet. but i dont have one of those cards :-P
> > > 
> > > ahsrdkrash
> > > 
> > > 
> > > Quoting Wuss912 <Wuss912 at cox.net>:
> > > 
> > > > How do I request a module to be added to the moonbase? 
> For example 
> > > > I would like to have http://hostap.epitest.fi/ added thanks
> > > >