Lilo is failing to compile from lin lilo

Wuss912 Wuss912 at cox.net
Mon Feb 3 14:52:30 GMT 2003


How far back was this error?
More than two weeks?
Cause I just finished building this system last week

-----Original Message-----
From: lunar-bounces at lunar-linux.org
[mailto:lunar-bounces at lunar-linux.org] On Behalf Of Steven Michalske
Sent: Monday, February 03, 2003 2:51 PM
To: This is the primary mailing list for Lunar Linux!
Subject: Re: Lilo is failing to compile from lin lilo


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

a little bit back there was a error in the keep source in th elinux
module 
that would remove its source

it could be that he was hit with that error

i would sugest that you lin linux again

hardkrash


On Monday 03 February 2003 5:43 pm, Wuss912 wrote:
> Not intentionally..
> (is there a setting in lunar that would cause this?)
>
> -----Original Message-----
> From: lunar-bounces at lunar-linux.org 
> [mailto:lunar-bounces at lunar-linux.org] On Behalf Of Shern, Benjamin J
> Sent: Monday, February 03, 2003 2:41 PM
> To: 'This is the primary mailing list for Lunar Linux!'
> Subject: RE: Lilo is failing to compile from lin lilo
>
>
> Maybe you thought you were done with the kernel code and deleted it 
> out of /usr/src?
>
> > -----Original Message-----
> > From: Shern, Benjamin J
> > Sent: February 03, 2003 3:40 PM
> > To: 'This is the primary mailing list for Lunar Linux!'
> > Subject: RE: Lilo is failing to compile from lin lilo
> >
> >
> > /usr/include/linux must not exist?  I believe it's supposed to be a 
> > link to ../src/linux/include/linux which in turn is linked to 
> > /usr/src/linux-2.4.20/include/linux.
> > (At least that's how my system is setup)
> >
> > > -----Original Message-----
> > > From: Wuss912 [mailto:Wuss912 at cox.net]
> > > Sent: February 03, 2003 3:37 PM
> > > To: lunar at lunar-linux.org
> > > Subject: Lilo is failing to compile from lin lilo
> > >
> > >
> > > Any suggestions?
> > > Or ideas of what could be wrong?
> > >
> > > root at server / # lin lilo
> > > Checking dependencies for lilo
> > > Building lilo
> > > installing in dir:/usr/src/lilo-22.4.1
> > > lilo 22.4.1
> > > Editing Makefile
> > > Editing Makefile
> > > Editing Makefile
> > > Editing Makefile
> > > Editing Makefile
> > > cc -E `( if [ -r $ROOT/etc/lilo.defines ]; then cat 
> > > $ROOT/etc/lilo.defines; else echo -DBDATA -DBUILTIN -DDSECS=3 
> > > -DIGNORECASE -DLBA32 -DLVM -DEVMS -DM386 -DONE_SHOT -DPASS160 
> > > -DREISERFS -DREWRITE_TABLE -DSOLO_CHAIN -DVARSETUP -DVERSION 
> > > -DUNIFY -DVIRTUAL; fi
> > > ) | sed 's/-D/-DLCF_/g'` `[ -r /usr/include/asm/boot.h ] && echo 
> > > -DHAS_BOOT_H` -DBITMAP second.S -o temp2.s cc -E -C -traditional 
> > > -DLILO_ASM -o common.s common.h echo "#define CFLAGS \"" -O2 -Wall

> > > -g `( if [ -r $ROOT/etc/lilo.defines
> > > ]; then cat $ROOT/etc/lilo.defines; else echo -DBDATA -DBUILTIN
> > > -DDSECS=3 -DIGNORECASE -DLBA32 -DLVM -DEVMS -DM386 -DONE_SHOT
> > > -DPASS160
> > > -DREISERFS -DREWRITE_TABLE -DSOLO_CHAIN -DVARSETUP -DVERSION
-DUNIFY
> > > -DVIRTUAL; fi ) | sed 's/-D/-DLCF_/g'` `[ -r
> >
> > /usr/include/asm/boot.h ]
> >
> > > && echo -DHAS_BOOT_H` `cat mylilo.h` "\"" >flags.i
> > > cc -E -traditional `( if [ -r $ROOT/etc/lilo.defines ]; then cat 
> > > $ROOT/etc/lilo.defines; else echo -DBDATA -DBUILTIN -DDSECS=3 
> > > -DIGNORECASE -DLBA32 -DLVM -DEVMS -DM386 -DONE_SHOT -DPASS160 
> > > -DREISERFS -DREWRITE_TABLE -DSOLO_CHAIN -DVARSETUP -DVERSION 
> > > -DUNIFY -DVIRTUAL; fi
> > > ) | sed 's/-D/-DLCF_/g'` `[ -r /usr/include/asm/boot.h ] && echo 
> > > -DHAS_BOOT_H` -o loader.s  loader.S cp -p dparam.S dparam.s
> > > cc -Wall -s -O -o activate activate.c
> > > cat bootsect.S pseudo.S >_TmP_.S
> > > cc -E -traditional `( if [ -r $ROOT/etc/lilo.defines ]; then cat
> > > $ROOT/etc/lilo.defines; else echo -DBDATA -DBUILTIN -DDSECS=3
> > > -DIGNORECASE -DLBA32 -DLVM -DEVMS -DM386 -DONE_SHOT -DPASS160
> > > -DREISERFS
> > > -DREWRITE_TABLE -DSOLO_CHAIN -DVARSETUP -DVERSION -DUNIFY
> > > -DVIRTUAL; fi
> > > ) | sed 's/-D/-DLCF_/g'` `[ -r /usr/include/asm/boot.h ] && echo
> > > -DHAS_BOOT_H` \
> > >                 -DSIZEDISKB=512 -o pseudo.s _TmP_.S
> > > as86 -0 -a -w -l temp2.lis -o temp2.o temp2.s
> > > cat: mylilo.h: No such file or directory
> > > as86 -0 -a -w -l dparam.lis -o dparam.o dparam.s
> > > ld86 -0 -s -o dparam.img dparam.o
> > > dd if=dparam.img of=dparam.com bs=288 skip=1
> > > 0+1 records in
> > > 0+1 records out
> > > rm -f _TmP_.S
> > > as86 -0 -a -w -l pseudo.lis -o pseudo.o pseudo.s
> > > ld86 -0 -s -o pseudo.img pseudo.o
> > > dd if=pseudo.img of=pseudo.b bs=32 skip=1
> > > 32+0 records in
> > > 32+0 records out
> > > ld86 -0 -s -o temp2.img temp2.o
> > > dd if=temp2.img of=temp2.b bs=32 skip=1
> > > 256+0 records in
> > > 256+0 records out
> > > echo -DMAX_SECONDARY_FILESIZE=`wc -c <temp2.b | sed "s/ //g"`
> > >
> > > >mylilo.h
> > >
> > > cc -c -O2 -Wall -g `( if [ -r $ROOT/etc/lilo.defines ]; then cat 
> > > $ROOT/etc/lilo.defines; else echo -DBDATA -DBUILTIN -DDSECS=3 
> > > -DIGNORECASE -DLBA32 -DLVM -DEVMS -DM386 -DONE_SHOT -DPASS160 
> > > -DREISERFS -DREWRITE_TABLE -DSOLO_CHAIN -DVARSETUP -DVERSION 
> > > -DUNIFY -DVIRTUAL; fi
> > > ) | sed 's/-D/-DLCF_/g'` `[ -r /usr/include/asm/boot.h ] && echo 
> > > -DHAS_BOOT_H` `cat mylilo.h` lilo.c cc -c -O2 -Wall -g `( if [ -r 
> > > $ROOT/etc/lilo.defines ]; then cat $ROOT/etc/lilo.defines; else 
> > > echo -DBDATA -DBUILTIN -DDSECS=3 -DIGNORECASE -DLBA32 -DLVM -DEVMS

> > > -DM386 -DONE_SHOT -DPASS160 -DREISERFS
> > > -DREWRITE_TABLE -DSOLO_CHAIN -DVARSETUP -DVERSION -DUNIFY
> > > -DVIRTUAL; fi
> > > ) | sed 's/-D/-DLCF_/g'` `[ -r /usr/include/asm/boot.h ] && echo
> > > -DHAS_BOOT_H` `cat mylilo.h` map.c
> > > cc -c -O2 -Wall -g `( if [ -r $ROOT/etc/lilo.defines ]; then cat
> > > $ROOT/etc/lilo.defines; else echo -DBDATA -DBUILTIN -DDSECS=3
> > > -DIGNORECASE -DLBA32 -DLVM -DEVMS -DM386 -DONE_SHOT -DPASS160
> > > -DREISERFS
> > > -DREWRITE_TABLE -DSOLO_CHAIN -DVARSETUP -DVERSION -DUNIFY
> > > -DVIRTUAL; fi
> > > ) | sed 's/-D/-DLCF_/g'` `[ -r /usr/include/asm/boot.h ] && echo
> > > -DHAS_BOOT_H` `cat mylilo.h` geometry.c
> > > cc -c -O2 -Wall -g `( if [ -r $ROOT/etc/lilo.defines ]; then cat
> > > $ROOT/etc/lilo.defines; else echo -DBDATA -DBUILTIN -DDSECS=3
> > > -DIGNORECASE -DLBA32 -DLVM -DEVMS -DM386 -DONE_SHOT -DPASS160
> > > -DREISERFS
> > > -DREWRITE_TABLE -DSOLO_CHAIN -DVARSETUP -DVERSION -DUNIFY
> > > -DVIRTUAL; fi
> > > ) | sed 's/-D/-DLCF_/g'` `[ -r /usr/include/asm/boot.h ] && echo
> > > -DHAS_BOOT_H` `cat mylilo.h` boot.c
> > > In file included from /usr/include/linux/genhd.h:12,
> > >                  from common.h:20,
> > >                  from lilo.c:25:
> > > /usr/include/linux/config.h:4:28: linux/autoconf.h: No such file
or
> > > directory
> > > In file included from /usr/include/linux/fs.h:9,
> > >                  from geometry.c:26:
> > > /usr/include/linux/config.h:4:28: linux/autoconf.h: No such file
or
> > > directory
> > > In file included from /usr/include/linux/genhd.h:12,
> > >                  from common.h:20,
> > >                  from map.c:22:
> > > /usr/include/linux/config.h:4:28: linux/autoconf.h: No such file
or
> > > directory
> > > In file included from /usr/include/linux/genhd.h:12,
> > >                  from common.h:20,
> > >                  from boot.c:24:
> > > /usr/include/linux/config.h:4:28: linux/autoconf.h: No such file
or
> > > directory
> > > make: *** [boot.o] Error 1
> > > make: *** Waiting for unfinished jobs....
> > > make: *** [map.o] Error 1
> > > make: *** [geometry.o] Error 1
> > >  ! Problem Detected !
> > > Creating /var/log/lunar/compile/lilo-22.4.1.bz2
> > > root at server / #
> > >
> > > _______________________________________________
> > > Lunar mailing list
> > > Lunar at lunar-linux.org 
> > > http://lunar-linux.org/mailman/listinfo/lunar
> >
> > _______________________________________________
> > Lunar mailing list
> > Lunar at lunar-linux.org http://lunar-linux.org/mailman/listinfo/lunar
>
> _______________________________________________
> Lunar mailing list
> Lunar at lunar-linux.org http://lunar-linux.org/mailman/listinfo/lunar
>
> _______________________________________________
> Lunar mailing list
> Lunar at lunar-linux.org http://lunar-linux.org/mailman/listinfo/lunar
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+PvJCJhwOdxS4dYERAuNRAJ9SlKzgjwbkDlRbboeLsDqI4ihHAwCgvDhB
eGKryGohGc9hyOcWz+Z8dKw=
=C0zB
-----END PGP SIGNATURE-----

_______________________________________________
Lunar mailing list
Lunar at lunar-linux.org http://lunar-linux.org/mailman/listinfo/lunar



More information about the Lunar mailing list