[Lunar-commits] CVS: crater/gnome-desktop/gdm BUILD, NONE, 1.1 DEPENDS, NONE, 1.1 DETAILS, NONE, 1.1 Default, NONE, 1.1 POST_INSTALL, NONE, 1.1 gdm.conf, NONE, 1.1 gnomerc, NONE, 1.1

Jan Eidtmann cmak at lunar-linux.org
Thu Mar 17 07:42:12 UTC 2005


Update of /var/cvs/lunar/crater/gnome-desktop/gdm
In directory espresso.foo-projects.org:/tmp/cvs-serv28401/gnome-desktop/gdm

Added Files:
	BUILD DEPENDS DETAILS Default POST_INSTALL gdm.conf gnomerc 
Log Message:
Gnome 2.10

--- NEW FILE: BUILD ---
(
 groupadd  gdm           2>/dev/null
 useradd   gdm  -g  gdm  2>/dev/null


 if    module_installed  Linux-PAM;  then  SCHEME="pam"
 elif  module_installed  shadow;     then  SCHEME="shadow"
                                     else  SCHEME="auto"
 fi

 OPTS="$OPTS --enable-authentication-scheme=$SCHEME"

 LDFLAGS="$LDFLAGS -L/usr/X11R6/lib"
 
 ./configure   --build=$BUILD                                        \
               --prefix=${GNOME210_PREFIX:-/usr}                      \
               --with-xinerama=yes				     \
               --sysconfdir=/etc/X11                                 \
               --localstatedir=/var                                  \
               --infodir=${GNOME210_PREFIX:-/usr}/share/info 	     \
               --mandir=${GNOME210_PREFIX:-/usr}/share/man            \
               $OPTS                                                 &&

 sedit 's#$(LINK)#$(LINK) $(LIBS)#' daemon/Makefile                  &&
 make                                                                &&
 prepare_install                                                     &&
 make install                                                        &&

 mkdir  -p           /var/gdm                                        &&
 chown  -R  gdm:gdm  /var/gdm                                        &&
 chmod  750          /var/gdm                                        &&

 # This has to be a DIRECTORY, not a FILE
 if [ -e "/etc/X11/gdm/Sessions" ]; then
   rm -fr /etc/X11/gdm/Sessions || true
 fi

 mkdir -p /etc/X11/gdm/Sessions/                                   &&
 install --mode=644 $SCRIPT_DIRECTORY/gnomerc /etc/X11/gdm/gnomerc &&
 install --mode=644 $SCRIPT_DIRECTORY/gdm.conf /etc/X11/gdm/gdm.conf &&
 install --mode=755 $SCRIPT_DIRECTORY/Sessions/gnome.desktop /etc/X11/dm/Sessions &&
 install --mode=755 $SCRIPT_DIRECTORY/Default /etc/X11/gdm/PreSession/ &&
 install --mode=755 $SCRIPT_DIRECTORY/Default /etc/X11/gdm/Sessions/ 

) > $C_FIFO 2>&1

--- NEW FILE: DEPENDS ---
depends libgnomeui &&
depends libglade2  &&
depends librsvg    &&
depends scrollkeeper 

--- NEW FILE: DETAILS ---
           MODULE=gdm
         VERSION=2.6.0.8
          SOURCE=$MODULE-$VERSION.tar.bz2
      SOURCE_URL=$GNOME_URL/desktop/2.10/2.10.0/sources/
      SOURCE_VFY=sha1:1f263b777b005a67b75560e992900136bb614b4b
        WEB_SITE=http://www.gnome.org
         ENTERED=20020716
         UPDATED=20050317
           SHORT="The Gnome Display Manager is a re-implementation of the well known xdm program"
cat << EOF
The Gnome Display Manager is a re-implementation of the well known xdm
program.  gdm 2.5 implements all significant features required for
managing local and remote displays.

gdm daemon:
 o X Authentication
 o Default and per-display initialization scripts
 o Pre and post session scripts
 o Pluggable Authentication Modules
 o XDMCP
 o TCP Wrappers for access control
 o Autologin for single user workstations
 o Timed login for kiosks and public terminals

gdmlogin:
 o Logo image
 o Background image/color
 o Halt and reboot
 o Iconified login window
 o Session selection support
 o Language selection support
 o GNOME session selection support
 o Face browser
 o Background program support
 o Xinerama support

gdmchooser:
 o Visual host browser 
 o Customizable icons

gdmconfig:
 o GUI way to configure everything about GDM

Most features can be turned on and off in the configuration file by
the sysadmin.

EOF

--- NEW FILE: Default ---
#!/bin/sh
#
# Note that any setup should come before the sessreg command as
# that must be 'exec'ed for the pid to be correct (sessreg uses the parent
# pid)
#
# Note that output goes into the .xsession-errors file for easy debugging
#
XSETROOT=`which xsetroot 2>/dev/null`
if [ x$XSETROOT != x ] ; then
	$XSETROOT -cursor_name left_ptr -solid "#363047"
fi


SESSREG=`which sessreg 2>/dev/null`
if [ x$SESSREG != x ] ; then
	# some output for easy debugging
	echo "$0: Registering your session with wtmp and utmp"
	echo "$0: running: $SESSREG -a -w /var/log/wtmp -u /var/run/utmp -x \"$X_SERVERS\" -h \"$REMOTE_HOST\" -l $DISPLAY $USER"

	exec $SESSREG -a -w /var/log/wtmp -u /var/run/utmp -x "$X_SERVERS" -h "$REMOTE_HOST" -l $DISPLAY $USER
	# this is not reached
fi

# some output for easy debugging
echo "$0: could not find the sessreg utility, cannot update wtmp and utmp"
exit 0

--- NEW FILE: POST_INSTALL ---

if module_installed gnome-session; then lin -c gnome-session; fi
if module_installed gnome-desktop; then lin -c gnome-desktop; fi



--- NEW FILE: gdm.conf ---
# GDM Configuration file.  You can use gdmsetup program to graphically
# edit this, or you can optionally just edit this file by hand.  Note that
# gdmsetup does not tweak every option here, just the ones most users
# would care about.  Rest is for special setups and distro specific
# tweaks.  If you edit this file, you should send the HUP or USR1 signal to
# the daemon so that it restarts: (Assuming you have not changed PidFile)
#   kill -USR1 `cat /var/run/gdm.pid`
# (HUP will make gdm restart immediately while USR1 will make gdm not kill
# existing sessions and will only restart gdm after all users log out)
#
# You can also use the gdm-restart and gdm-safe-restart scripts which just
# do the above for you.
#
# Have fun! - George

[daemon]
# Automatic login, if true the first local screen will automatically logged
# in as user as set with AutomaticLogin key.
AutomaticLoginEnable=false
AutomaticLogin=
# Timed login, useful for kiosks.  Log in a certain user after a certain
# amount of time
TimedLoginEnable=false
TimedLogin=
TimedLoginDelay=30
# A comma separated list of users that will be logged in without having
# to authenticate on local screens (not over xdmcp).  Note that 'root'
# is ignored and will always have to authenticate.
LocalNoPasswordUsers=
# If you are having trouble with using a single server for a long time and
# want gdm to kill/restart the server, turn this on
AlwaysRestartServer=true
# The gdm configuration program that is run from the login screen, you should
# probably leave this alone
Configurator=/usr/bin/gdmsetup
GnomeDefaultSession=/usr/share/gnome/default.session
# The chooser program.  Must output the chosen host on stdout, probably you
# should leave this alone
Chooser=/usr/bin/gdmchooser
# Default path to set.  The profile scripts will likely override this
DefaultPath=/usr/local/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/usr/bin:/bin
# Default path for root.  The profile scripts will likely override this
RootPath=/sbin:/usr/bin:/usr/sbin:/bin:/usr/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/local/bin
DisplayInitDir=/etc/X11/gdm/Init
# Greeter for local (non-xdmcp) logins.  Change gdmlogin to gdmgreeter to
# get the new graphical greeter.
Greeter=/usr/bin/gdmgreeter
# Greeter for xdmcp logins, usually you want a less graphically intensive
# greeter here so it's better to leave this with gdmlogin
RemoteGreeter=/usr/bin/gdmlogin
# User and group that gdm should run as.  Probably should be gdm and gdm and
# you should create these user and group.  Anyone found running this as
# someone too privilaged will get a kick in the ass.  This should have
# access to only the gdm directories and files.
User=gdm
Group=gdm
# To try to kill all clients started at greeter time or in the Init script.
# doesn't always work, only if those clients have a window of their own
KillInitClients=true
LogDir=/var/gdm
# You should probably never change this value unless you have a weird setup
PidFile=/var/run/gdm.pid
PostSessionScriptDir=/etc/X11/gdm/PostSession/
PreSessionScriptDir=/etc/X11/gdm/PreSession/
# Distributions:  If you have some script that runs an X server in say
# VGA mode, allowing a login, could you please send it to me?
FailsafeXServer=
# if X keeps crashing on us we run this script.  The default one does a bunch
# of cool stuff to figure out what to tell the user and such and can
# run an X configuration program.
XKeepsCrashing=/etc/X11/gdm/XKeepsCrashing
# Reboot, Halt and suspend commands, you can add different commands
# separated by a semicolon and gdm will use the first one it can find
RebootCommand=/sbin/shutdown -r now;/usr/sbin/shutdown -r now
HaltCommand=/usr/bin/poweroff;/sbin/poweroff;/sbin/shutdown -h now;/usr/sbin/shutdown -h now
SuspendCommand=
# Probably should not touch the below this is the standard setup
ServAuthDir=/var/gdm
SessionDir=/etc/X11/gdm/Sessions/
# Better leave this blank and HOME will be used.  You can use syntax ~/ below
# to indicate home directory of the user
UserAuthDir=
# Fallback if home directory not writable
UserAuthFBDir=/tmp
UserAuthFile=.Xauthority
# The X server to use if we can't figure out what else to run.
StandardXServer=/usr/X11R6/bin/X
# The maximum number of flexible X servers to run.
FlexibleXServers=5
# the X nest command
Xnest=/usr/X11R6/bin/Xnest -name Xnest
# Automatic VT allocation.  Right now only works on Linux.  This way
# we force X to use specific vts.  turn VTAllocation to false if this
# is causing problems.
FirstVT=7
VTAllocation=true

[security]
# If any distributions ship with this one off, they should be shot
# this is only local, so it's only for say kiosk use, when you
# want to minimize possibility of breakin
AllowRoot=true
# If you want to be paranoid, turn this one off
AllowRemoteRoot=false
# This will allow remote timed login
AllowRemoteAutoLogin=false
# 0 is the most anal, 1 allows group write permissions, 2 allows all write permissions
RelaxPermissions=0
RetryDelay=3
# Maximum size of a file we wish to read.  This makes it hard for a user to DoS us
# by using a large file.
UserMaxFile=65536
# Maximum size of the session file.  This is larger because it matters less as we
# never keep it all in memory.  Just has an upper limit so that we don't go into too
# long of a loop
SessionMaxFile=524388

# XDMCP is the protocol that allows remote login.  If you want to log into
# gdm remotely (I'd never turn this on on open network, use ssh for such
# remote usage that).  You can then run X with -query <thishost> to log in,
# or -indirect <thishost> to run a chooser.  Look for the 'Terminal' server
# type at the bottom of this config file.
[xdmcp]
# Distributions: Ship with this off.  It is never a safe thing to leave
# out on the net.  Alternatively you can set up /etc/hosts.allow and
# /etc/hosts.deny to only allow say local access.
Enable=false
# Honour indirect queries, we run a chooser for these, and then redirect
# the user to the chosen host.  Otherwise we just log the user in locally.
HonorIndirect=true
# Maximum pending requests
MaxPending=4
MaxPendingIndirect=4
# Maximum open XDMCP sessions at any point in time
MaxSessions=16
# Maximum wait times
MaxWait=15
MaxWaitIndirect=15
# How many times can a person log in from a single host.  Usually better to
# keep at 1 to fend off DoS attacks by running many logins from a single
# host
DisplaysPerHost=1
# The port.  177 is the standard port so better keep it that way
Port=177
# Willing script, none is shipped and by default we'll send
# hostname system id.  But if you supply something here, the
# output of this script will be sent as status of this host so that
# the chooser can display it.  You could for example send load,
# or mail details for some user, or some such.
Willing=/etc/X11/gdm/Xwilling

[gui]
# The 'theme'.  By default we're using the default gtk theme
# Of course assuming that gtk got installed in the same prefix,
# if not change this.
GtkRC=/usr/share/themes/Default/gtk/gtkrc
# Maximum size of an icon, larger icons are scaled down
MaxIconWidth=128
MaxIconHeight=128

[greeter]
# Greeter has a nice title bar that the user can move
TitleBar=true
# Configuration is available from the system menu of the greeter
ConfigAvailable=true
# Face browser is enabled.  This only works currently for the
# standard greeter as it is not yet enabled in the graphical greeter.
Browser=false
# The default picture in the browser
DefaultFace=/usr/share/pixmaps/nobody.png
# These are things excluded from the face browser, not from logging in
Exclude=bin,daemon,adm,lp,sync,shutdown,halt,mail,news,uucp,operator,nobody,gdm,postgres,pvm,rpm
# As an alternative to the above this is the minimum uid to show
MinimalUID=100
# If user or user.png exists in this dir it will be used as his picture
GlobalFaceDir=/usr/share/faces/
# Icon we use
Icon=/usr/share/pixmaps/gdm.png
# File which contains the locale we show to the user.  Likely you want to use
# the one shipped with gdm and edit it.  It is not a standard locale.alias file,
# although gdm will be able to read a standard locale.alias file as well.
LocaleFile=/etc/X11/gdm/locale.alias
# Logo shown in the standard greeter
Logo=/usr/share/pixmaps/gdm-foot-logo.png
# The standard greeter should shake if a user entered the wrong username or
# password.  Kind of cool looking
Quiver=true
# The system menu is shown in the greeter
SystemMenu=true
# Note to distributors, if you wish to have a different Welcome string
# and wish to have this translated you can have entries such as
# Welcome[cs]=Vitejte na %n
# Just make sure the string is in utf-8
Welcome=Welcome to %n
# Don't allow user to move the standard greeter window.  Only makes sense
# if TitleBar is on
LockPosition=false
# Set a position rather then just centering the window.  If you enter
# negative values for the position it is taken as an offset from the
# right or bottom edge.
SetPosition=false
PositionX=0
PositionY=0
# Xinerama screen we use to display the greeter on.  Not for true
# multihead, currently only works for Xinerama.
XineramaScreen=0
# Background settings for the standard greeter:
# Type can be 0=None, 1=Image, 2=Color
BackgroundType=2
BackgroundImage=
BackgroundScaleToFit=true
BackgroundColor=#363047
# XDMCP session should only get a color, this is the sanest setting since
# you don't want to take up too much bandwidth
BackgroundRemoteOnlyColor=true
# Program to run to draw the background in the standard greeter.  Perhaps
# something like an xscreensaver hack or some such.
BackgroundProgram=
# if this is true then the background program is run always, otherwise
# it is only run when the BackgroundType is 0 (None)
RunBackgroundProgramAlways=false
# Show the chooser (you can choose a specific saved gnome session) session
ShowGnomeChooserSession=true
# Show the Failsafe sessions.  These are much MUCH nicer (focus for xterm for
# example) and more failsafe then those supplied by scripts so distros should
# use this rather then just running an xterm from a script.
ShowGnomeFailsafeSession=true
ShowXtermFailsafeSession=true
# Always use 24 hour clock no matter what the locale.
Use24Clock=false
# Use circles in the password field.  Looks kind of cool actually
UseCirclesInEntry=false
# These two keys are for the new greeter.  Circles is the standard
# shipped theme
GraphicalTheme=circles
GraphicalThemeDir=/usr/share/gdm/themes/

# The chooser is what's displayed when a user wants an indirect XDMCP
# session
[chooser]
# Default image for hosts
DefaultHostImg=/usr/share/pixmaps/nohost.png
# Directory with host images, they are named by the hosts: host or host.png
HostImageDir=/usr/share/hosts/
# Time we scan for hosts (well only the time we tell the user we are
# scanning actually)
ScanTime=3
# A comma separated lists of hosts to automatically add (if they answer to
# a query of course).  You can use this to reach hosts that broadcast cannot
# reach.
Hosts=
# Broadcast a query to get all hosts on the current network that answer
Broadcast=true

[debug]
# This will enable debugging into the syslog, usually not neccessary
# and it creates a LOT of spew of random stuff to the syslog.  However it
# can be useful in determining when something is going very wrong.
Enable=false

[servers]
# These are the standard servers.  You can add as many you want here
# and they will always be started.  Each line must start with a unique
# number and that will be the display number of that server.  Usually just
# the 0 server is used.
0=Standard
#1=Standard
# Note the VTAllocation and FirstVT keys on linux.  Don't add any vt<number>
# arguments if VTAllocation is on, and set FirstVT to be the first vt
# available that your gettys don't grab (gettys are usually dumb and grab
# even a vt that has already been taken).  Using 7 will work pretty much for
# all linux distributions.  VTAllocation is not currently implemented on
# anything but linux since I don't own any non-linux systems.  Feel free to
# send patches.  X servers will just not get any extra arguments then.
#
#Note: If you want to run an X terminal you could add an X server such as this
#0=Terminal -query serverhostname
# or for a chooser (optionally serverhostname could be localhost)
#0=Terminal -indirect serverhostname

# Definition of the standard X server.
[server-Standard]
name=Standard server
command=/usr/X11R6/bin/X
flexible=true

# To use this server type you should add -query host or -indirect host
# to the command line
[server-Terminal]
name=Terminal server
# Add -terminate to make things behave more nicely
command=/usr/X11R6/bin/X -terminate
# Make this not appear in the flexible servers (we need extra params
# anyway, and terminate would be bad for xdmcp)
flexible=false
# Not local, we do not handle the logins for this X server
handled=false

--- NEW FILE: gnomerc ---
startssh=
sshagent=/usr/bin/ssh-agent
gnomesession=/usr/bin/gnome-session

if [ -x $sshagent -a -z "$SSH_AUTH_SOCK" ]; then
  startssh=yes
fi

if [ -n "$startssh" ]; then
  exec $sshagent -- $gnomesession
else
  exec $gnomesession
fi



More information about the Lunar-commits mailing list